Chemical- Mounting Media

• Hydromount

• Plastic UV Mount

• Entellan®

• Eukitt®

• SHUR/Mount™ Water Based Mounting Medium

• DPX Mountant for Microscopy

• Histomount

• Mount Quick -Water Base

• Mount Quick - Solvent Base

• Quick-Stick® Mounting Medium

• SHUR/Mount™ Toluene Base Mounting Medium

• Biobond^™ - Tissue Section Adhesive

• Biomount^™ - Tissue Section Mounting Medium

• Citifluor Antifadent Mountant Media

Hydromount

Hydromount is a water-based synthetic resin, containing glycerin, suitable for mounting specimens which have been processed in water. Hydromount can be used for frozen sections as well as amyloid and Immuno fluorescent staining procedures.

Plastic UV Mount

Designed to match the refractive index of JB-4 embedded sections thus improving the final cover glass mount. Hardens permanently within minutes when exposed to long wave UV light.
 

Entellan®
(New improved formula)

Colorless - rapid mounting media for microscopy. Very good mounting media for long life preparation. There is no bubble formation at high ambient temperatures. The cure time is 20 minutes at room temperature.
 

Eukitt®

This is a quick-hardening mounting medium possessing physical, chemical and optical properties which make it ideal for slide preparations. It is neutral, colorless and spread quickly and evenly. Refractive index same as glass. In addition is useful for sealing cover slip over wet preparations.

SHUR/Mount™ Water based Mounting Medium

A unique water based mounting medium for use in all Immuno procedures.
Designed for cover slipping wet slides.

Available in 20 ml bottle
 

Back to Top

DPX Mountant for Microscopy

A colorless, synthetic resin mounting media. Replaces Xylene-Balsam mountant. It preserves the stain and dries quickly.

Back to Top

Histomount.

Histomount is a non-hazardous synthetic mountant. It has neutral pH, is UV stabilized and is effective with most clearing agents when used as a liquid cover slip seal.
 
 

Mount Quick -Water Base

Mounting media for cover glass. It was developed for mounting stained sections for lipoid and immune staining. It comes in a convenient 30 ml bottle.

 
 

Mount Quick - Solvent base

This a solvent base mounting media comes in a tightly capped tube. It is soluble in xylene. Mount Quick dries quickly ( 10 minutes) and not forming bubbles.
 

Quick-Stick® Mounting Medium

This mounting medium  is available in a convenient stick form that can be applied to a slide on a hot plate. Once the specimen and cover glass are positioned and the slide is cooled, a permanent preparation is formed. The process can  be reversed by reheating the slide.
 

SHUR/Mount™ Toluene base
Mounting Medium

A Toluene based acrylic resin. Designed for rapid drying. Ideal for manual cover slipping, and routine microscope slide preparations.
 

Biobond^™ - Tissue Section Adhesive

This tissue section adhesive produces a
very strong adhesion between the glass
slide and the tissue section, even after
various manipulations such as incubation
etc. Biobond is suitable for many types of
tissue specimens, paraffin, resin and
others. Available in a 20 ml vial, which is
sufficient to coat as many as 1000 slides.

Store at room temperature.

Back to Top

Biomount^™ - Tissue Section Mounting Medium

Biomount^™ mounting media is specially formulated to reduce fading of Immuno gold/silver signals in sections on glass slides. It is suitable for wax or resin embedded sections of tissue.

Back to Top

Citifluor Antifadent Mountant Media

The photofading of fluorescein-labelled materials can be retarded by the use of the Citifluor mountants.

Three types are available.

AF1  Is a Glycerol-phosphate buffered solution
containing additives for use with labeled tissue.

AF2  Is a Glycerol solution containing additives for use with  labeled tissue sections

AF3  Is a Phosphate-buffered saline solution containing    additives for examination of whole cells.

Available in 25 ml bottle.

Further information available on request.