|
|
Canemco & Marivac Products for Electron Microscopy and Histology | |
|
|
||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Catalog # | Description | Qty |
| CP19950 | Polyfin™ Embedding medium | 1 kg bag |
| CP19951 | Polyfin™ Embedding medium | 8 x 1 kg /case |
| Please use the catalog number and description when ordering. | ||
Paramat
Original British mixture of paraffin wax and plastic polymers. It has been
used in the histology laboratories all over the world. This embedding medium
offers improved tissue penetration, easier ribbon sectioning and reduced
tendency to crumble. Milky white pastilles, melting point: 56-58°C.
| Catalog # | Description | Qty |
| CP19960 | Paramat, embedding medium | 1 kg/bag |
| Please use the catalog number and description when ordering. | ||
Paramat Extra
A very small amount ( less than 0.1 %) of of dimethyl
sulfoxide (DMSO) added to Paramat. This formulation offers additional
advantages, such as faster penetration of the tissue and more homogeneous
matrix to support the specimen.
| Catalog # | Description | Qty |
| CP19961 | Paramat Extra embedding medium |
1 kg/bag |
| Please use the catalog number and description when ordering. | ||
Paraffin Embedding Media
Non-toxic refined paraffin with thin thermoplastic polymers. Pellet form reduces melting time. No cell shrinkage or distortion
| Catalog # | Description | Qty |
| 19939 | Paraffin Wax, 53-55° melting point | 10 lbs |
| 19940 | Paraffin Wax, 56-58° melting point | 10 lbs |
| 19941 | Paraffin Wax, 60-62° melting point | 10 lbs |
| Please use the catalog number and description when ordering. | ||
JB-4™ Embedding Kit
The JB-4™ is a water soluble embedding medium based on Glycol Methacrylate plastic embedding. This is the leading plastic embedding medium for high resolution light microscopy. Conventional paraffin sections have much greater shrinkage and inadequate morphology when compared to JB-4™.
Easily cuts thin sections, 0.5 - 2 microns
Cures at room temperature
Gives sharp and brilliant staining
Water soluble
Kit
Contents
Plus
It features a cooler acting accelerator system for
Plus It yields a crystal clear and harder block which is Kit
Contents
Gives good results even with difficult specimens
JB4™
Embedding Kit
Solution A
800 ml
Solution B
30 ml
Catalyst
12 g
Catalog #
Description
Qty
060
JB-4™ Embedding Kit
1 kit
060-1
JB-4™ Solution A
800 ml
060-3
JB-4™ Catalyst
12 g
060-2
JB-4™ Solution B
30 ml
Please use the catalog number
and description when ordering.
JB-4 Plus™ Embedding Kit
The JB-4 Plus™ offers all the same features as the
JB-4™
greater protection of sensitive tissue components
ideal for dense tissue samples
JB4 Plus™
Embedding Kit
Solution A
500 ml
Solution B
15 ml
Catalyst
8 g
Catalog #
Description
Qty
0601
JB-4 Plus™ Embedding Kit
1 kit
0601-1
JB-4 Plus™ Solution A
500 ml
0601-2
JB-4 Plus™ Solution B
15 ml
0601-3.
JB-4 Plus™ Catalyst
8 g
Please use the catalog number
and description when ordering.
Histocryl Resin Kit
Histocryl is a hydrophilic acrylic resin of low toxicity which is easy to
use and is formulated specifically for light microscopy. It permits the use
of most routine staining techniques without prior removal or etching of the
resin.
| Histocryl Resin Kit | |
|
Kit Contents |
|
| Histocryl Resin | 500 g |
| Catalyst | 50g |
| Accelerator | 10ml |
| Catalog # | Description | Qty |
| CH010-0 | Histocryl Resin Kit | 1 kit |
| Please use the catalog number and description when ordering. | ||
LR White Resin
This is a hydrophilic acrylic resin of low viscosity. The resin has wide application being suitable for both light and electron microscopy. It may be thermally or cold cured. Successfully used for immunocytochemical and immunohistochemical techniques. It is not designed to be used at very low temperatures.
Available in three grades of hardness; soft medium and hard.
Must be stored at 4°C.
| Catalog # | Description | Qty |
| 043 | LR White Resin, Soft grade, | 500 g |
| 044 | LR White Resin, Medium grade, | 500 g |
| 045 | LR White Resin, Hard grade, | 500 g |
| 046 | LR White Accelerator, | 25 g |
| Please use the catalog number and description when ordering. | ||
LR Gold Resin
It is a non-toxic acrylic resin with low viscosity. LR Gold is
designed primarily for embedding unfixed tissue at low
temperature. This enables enzyme histochemistry and
immunocytochemistry of many fixation sensitive enzymes to be
carried our in 1—4 micron resin sections.The resin may be cured
at –25°C using Benzil, a light sensitive initiator and a visible
light curing source. It is recommended that Polyvinylpyrrolidone
(PVP) be used to protect unfixed tissue from osmotic changes
during processing.
| Catalog # | Description | Qty |
| 166 | LR Gold resin | 500 g |
| CL009-5 | Benzil | 50g |
| CL009-6 | Polyvinylpyrrolidone (PVP) | 100g |
| Please use the catalog number and description when ordering. | ||
Histo-Clear
A histological clearing agent which is non-toxic and non-flammable. It can
be substituted for xylene or toluene in the preparation and staining of
sections for histology. It is miscible with ethanol, isopropanol, and
paraffin based embedding media.
| Catalog # | Description | Qty |
| CH134-5 | Histo-Clear | 3.8 liter |
| Please use the catalog number and description when ordering. | ||
Histo-Clear II.
This has all the properties of Histo-Clear with a much reduced citrus odor.
It may be substitute for toluene and xylene.
| Catalog # | Description | Qty |
| CH134-6 | Histo-Clear II | 3.8 liters |
| Please use the catalog number and description when ordering. | ||
Embedding Cassettes |
Storage Boxes |
Disposable Plastic Ware
Microtome Knife Reconditioning Service
|
MARIVAC
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
