Large interior volume desiccator, clear polycarbonate top and
white polypropylene bottom. These units have extra heavy walls to eliminate the danger of
implosion. Will hold a vacuum of 740mm of Hg for a period of 24 hours. The
stopcock is highly visible red, and has a port which accepts 6.4mm I.D. tubing.
The neoprene O-ring seal does not require grease, but is not
harmed if grease is used. The polypropylene bottom section provides excellent
chemical resistance.
|
Cat # |
Description |
Qty |
|
1201-1 |
Small Polypropylene vacuum desiccator |
Each |
|
1201-2 |
Medium Polypropylene vacuum desiccator |
Each |
|
1201-3 |
Large Polypropylene vacuum desiccator |
Each |
|
Please use the catalog number
and description when ordering. |
Back
To Top
Clear Top and Bottom Vacuum Desiccator
The clear top and bottom vacuum desiccator is constructed of polycarbonate,
and has the
same features and dimensions as the polypropylene desiccators.
|
Cat # |
Description |
Qty |
|
1201-4 |
Small, Clear Top and Bottom Vacuum desiccator |
Each |
|
1201-5 |
Medium, Clear Top and Bottom Vacuum desiccator |
Each |
|
1201-6 |
Large, Clear Top and Bottom Vacuum desiccator |
Each |
|
Please use the catalog number
and description when ordering. |
Back
To Top
Mini Vacuum Desiccator
Top section of this vacuum desiccator is clear molded
polycarbonate, the bottom section is polypropylene. Ideal for small samples.
Vacuum retention rating is 740mm Hg, (29”)
Interior dimensions: 102mm diameter x 59mm high.
The base is 175mm diameter.
|
Cat # |
Description |
Qty |
|
1201-7 |
Mini Vacuum Desiccator |
Each |
|
Please use the catalog number
and description when ordering. |
Back
To Top
Vacuum Bell Jar and Plate
Very useful for vacuum drying and degassing procedures. The
chamber is made of clear polycarbonate for full visibility. The polypropylene
stopcock has a Teflon® TFE plug and it accepts 6.4mm inside diameter tubing. The
chamber inside diameter is 20cm and maximum inside height 11 cm.
The plate is 44mm x 232mm in diameter. Between the plate and
chambers' flange is an O-ring seal.
|
Cat # |
Description |
Qty |
|
1201-8 |
Vacuum Bell Jar and Plate |
Each |
|
Please use the catalog number
and description when ordering. |
Back
To Top
Replacement Stopcocks
Polypropylene body with PTFE plug and washer, and bright red
handle with nut. Taper fits on the desiccator port, and the plug is three-way for
vacuum draw, shut-off and vacuum release. Used on the
# 1201 series desiccators.
|
Cat # |
Description |
Qty |
|
1201-10 |
Replacement Stopcocks |
Each |
|
Please use the catalog number
and description when ordering. |
Back
To Top
Vacuum-Pressure
Indicator
The bellows collapses when there is negative pressure vacuum
within the desiccator and expands under ambient atmospheric pressure. This
provides an instant
indication as to whether your desiccator is under vacuum or not. The vacuum indicator
fits on the tapered outlet of desiccator stopcock.
|
Cat # |
Description |
Qty |
|
1201-12 |
Vacuum pressure indicator |
Each |
|
Please use the catalog number
and description when ordering. |
Back
To Top
