Slide Staining

Coplin Staining Jar with Glass Cover

Holds 25 x 75 mm microscope slides in a vertical position while being stained. The glass cover is circular and is ground to the dish in order to prevent evaporation. Five grooves accommodate five single slides or ten slides back to back. Requires only a small volume of staining solution .

 

Back to Top

Coplin Staining Jar with Plastic Screw Cap

Holds 25 x 75 mm microscope slides in a vertical position while being stained. The polypropylene screw cap is liner less and thus reduces solvent evaporation. Five grooves accommodate five single slides or ten back to back. Requires small staining solution volume.
 

Back to Top

Cover Glass Staining Jar

Staining jar with ground glass cover. Accommodates 4 cover glasses of 18 x 22mm or 8 back to back. Requires a low volume of reagent.

Back to Top

Staining Jar for Cover glasses

Glass jar with plastic screw top lid will holds four 22x22mm square cover glasses vertically or 8 back to back. Low volume of solution required (8 ml).
 

Back to Top

Plastic Staining Jar

Made of molded polyethene with a screw cap lid. It has five grooves to accept 5 microscope slides 25 x 75 mm or 10 slides back to back. Staining solution requirement  of approx. 30 ml.
 

Back to Top

Modified Coplin Staining Dish

Eight grooves for 25 x 75mm microscope slides in vertical position (can also hold 16 slides back to back). Comes with glass cover with centering shoulder. Total height with covers is 100 mm.

Back to Top

Staining Dish for Horizontal Slides

This glass staining dish with glass cover is for staining 25 x 75 mm microscope slides. Microscope slides are placed in the grooves horizontally. Will hold 10 slides or 20 slides back to back. Slides can also be arranged (19) straight across and diagonally.
 

Back to Top

Slide Staining Unit for 30 slides

(Staining Rack and Glass Staining Dish)

The staining dish accommodates a 30 slide rack, and ismade from soda-lime glass.The rack is made from non-tarnishable stainless steel and is resistant to most staining solutions.

Available as a staining set ( 1 stainless steel rack, one rack and one lid), or as individual components.

Dimensions:  Inside:    135mm x 102 mm x 69mm

                        Outside: 146 mm x 113 mm x 83 mm

Back to Top

Slide Staining Unit for 50 slides

(Staining Rack and Glass Staining Dish)

The staining dish accommodates a 50 slide rack, and made from soda-lime glass.

The rack is made from non-tarnishable stainless steel and is resistant to most staining solutions, designed to hold 50 microscope slides

Available as a staining set ( 1 stainless steel rack, one rack and one lid), or as individual components.

Dimensions:   Inside:    186mm x 189 mm x 6                         

                         Outside: 200 mm x 105 mm x 83 mm
 

Back to Top

Polypropylene Staining Dish (10 Slides)

Blue polypropylene staining jar will hold up to 10, 25 x 75mm microscope slides  horizontally. The staining dish is autoclavable. Dimensions: 82 x 57 x 42 mm
 

Back to Top

Polypropylene Staining Dish (5 slides)

This Red polypropylene staining jar will hold up to 5 microscope slides of 25 x 75 mm horizontally. The staining dish is autoclavable. Dimensions: 82 x 33 x 42 mm
 

Back to Top

Single Slide Stainer

Single slide stainer allows the staining one slide at a time using a small volume of staining solution. It is also very useful for slide dipping in emulsion, i.e.. Formvar .The Lucite holder ordered separately) will hold  the slide stainer firmly. A three  compartment version of the holder is also available

Back to Top

Coverslip Staining Rack

Stainless steel rack with grooves  holds coverslips in a vertical position. It will hold 25 cover glasses.

Please note: these stainless steel coverslip racks can be ordered for most coverslip diameters, from 12 to 25 mm. A  6 coverslip rack is also  available on special order.
 

Back to Top

Slide Staining System

Another user friendly approach to immunohistochemistry

staining. This tray is also suitable not only for routine staining requiring a humid chamber but is also ideal

for Hematology, Cytology and Microbiology laboratories.

Manipulation is made safe and easy by using only one hand.

The StainTray^TM has a black base made of tough ABS plastic withstanding a wide range of

chemicals ( Avoid chlorinated hydrocarbons ). It will accept up to 20 slides on four plastic rails covered with a polymer strip to perfectly hold slides even if tray is held at an angle. When humidity is needed, wells between rails will hold up to one ml of water securely without splashing. Middle wells will hold up to 2 ml each. Rails are

raised not only to avoid water touching the slides but to make them more easily retrievable. The base will also hold excess stain solution dripping from the slides. Four rubber feet ensure greater base stability. Units are stackable for space saving purposes.

Two covers are available:

• A clear one allowing for visual examination. Made of PETG with a temperature range of -20 °C to +60 °C.

• A black lid for fluorescent work. Made of ABS with a temperature range of -80 °C to +80 °C

Dimensions with cover: 38 x 24 x 4.5 cm H (15 x 9 3/8 x 1 3/4 in. H)

* DO NOT USE  WITH ACETONE

Slide Staining System

This 10-slide StainTray^TM offers the same great features and benefits as the M920

Model. Dimensions with cover: 24 x 24 x 4.5 cm H (9 3/8 x 9 3/8 x 1 3/4 in. H)

* DO NOT USE  WITH ACETONE

Back to Top

Embryo Dish

A molded clear glass dish for viewing or staining free floating specimens. Supplied with glass lid. The internal diameter is 30 mm
 
 

Back to Top

Spot Plates

These spot plates are available in white porcelain or plastic. 120 x 90 mm size and has 12 cavities approx. 7.5 mm deep.
Useful for staining, replica washing or for color reactions.
 

Back to Top

Basic Microscope Slides |  Coverslips  |  EasyDip™| Hemacytometers
Microtome Knife Reconditioning Service | Slide Holders & Storage | Slide Mailers

Slide Staining | Special Purpose Microscope Slides