Specimen Mount Adapters

These mount adapters accommodate the standard 3.1mm
pin type mount to JEOL, ISI, Topcon Hitachi specimen mount.

Back To Top

Pin Mount Adapter

These adapters will accommodate the standard 3.2 mm pin type specimen mount to other type of specimen holders.
 

Back To Top

Adapter for Hitachi S-570

Special 3.2 mm pin specimen mount adapter for Hitachi S-570 microscope. 16 mm diameter and 55 mm length.
 

Back To Top

SEM Holder for TEM Grids
 

This pin type aluminum mount allows four EM grids to be held securely for SEM work. There is a hole bellow each grid.

Back To Top

Pin Type Adaptor for Cambridge S-4 Mount

This is a useful adapter which allows the 32mm Cambridge S-4 specimen stubs to be used in a stage designed for the 3.1mm specimen holder

Back To Top

Multi Specimen Mount

Will hold three 3.1mm pin type specimen holders. Multi specimen mount has 3.2mm pin ( illustrated with 15mm diameter cylinder adapter).

Back To Top

Cover Slip Holder Adapter

Will hold 22x22 mm cover slip with two stainless steel clips. Cover slip mount has 3.1mm pin, for 15mm cylinder mount use our adapter #756A.

Back To Top

Micro - Vise

Micro-vise is supplied with 3.1mm pin. Jaws are 25mm  wide and will open   to a maximum of 14mm. This is a very useful type of specimen holder for SEM samples. For the 15mm cylinder holder please order our adapter #  756A.

Back To Top

Multi Specimen Mount

Will hold five 10mm cylinder specimen mounts. Standard multi specimen mount comes with 3.2 mm pin.  An adapter is available.

Back To Top

SEM Bulk Specimen Holder

This type specimen holder will hold bulky, irregular samples. The opening is 15 mm wide, 25 mm long and 9.5 mm deep.

Made of aluminum.

Back To Top

Split SEM Specimen Mounts

Split specimen mounts are available with 3.1mm pin type for Amray and 15mm cylinder type mount.  Excellent specimen mount for textile, plastic or metal section examination. 6mm wide  opening.

Back To Top

Slotted Specimen Stub

This 12.5 mm aluminum pin stub has a special slot with two grub screws which allow specimens to be clamped for examination. Supplied with an Allen key

Back To Top

Gripping Stubs

A small gripping stub which fits any stage taking standard pin type stubs. This enables specimens to be mounted edge-on for examination in the SEM.

Back To Top

Multi Stub Holder for Pin Mount

This carousel holds eight 12.7 mm pin style mounts.

Back To Top

SEM Metallurgical Mount Sample Holder
 

This holder with pin stubs accepts standard 31.8 mm metallurgical mounts.

Back To Top

Hitachi Three Stub Holder

This aluminum holder with M4 thread accommodates three15 mm Hitachi stubs.

Back To Top

Hitachi Holder for Six Pin Stubs

This holder with M4 thread accommodates six pin stubs.

Back To Top

Clamping Bar

This bar type clamp, with a stub type mount at the back, will accommodate specimens up to 72mm in length. The reversible jaws operate independently, allowing the region of interest to be positioned within the travel limits of the microscope stage.

Overall length: 102 mm
Width including jaw mechanism: 42 mm
Width of bar: 16 mm
Height (excluding base mount): 19 mm
Maximum jaw opening: 72 mm
 

Back To Top

 Specimen clamp

This clamp is supplied with five interchangeable jaws to accommodate samples of different widths. Maximum acceptable sample width is 20 mm.

Overall length: 39 mm
Overall width: 26 mm
Height (excluding base mount): 16 mm.

Back To Top

Thumb Wheel Clamp
 

The thumb wheel clamp operates a symmetrical vise motion of the clamp bars. The clamp bars are reversible to give different sized indentations to accommodate irregular specimens . Two versions are available one having a maximum jaw width of 34mm, the other 51mm.

Dimension for the 34mm model are:
Base length: 62 mm
Base length including thumb wheel mechanism: 72 mm
Width: 44 mm
Height (excluding base mount): 27 mm
Maximum jaw opening: 34 mm


Dimension for the 51mm model are:
Base length: 82mm
Base length including thumb wheel mechanism: 96 mm
Width: 58 mm
Height (excluding base mount): 30 mm
Maximum jaw opening: 51 mm

Back To Top