SEM Adhesives

• Aluminum and Copper Tape

• Adhesive Transfer Tape (No.465 )

• Adhesive Transfer Tape (No.410)

• Adhesive Tape, Non-conductive
  (With liner)

• Adhesive Tape, Non-conductive
  (Without liner)

• Apiezon W100 Wax

• Camel Hair Brushes.

• Carbon Conductive Tabs

• Carbon Conductive Cement

• Carbon Tape of Carbon Tabs Quality

• Colloidal Graphite

• Colloidal Graphite (Aquadag)

• Colloidal Silver Paste

• Conductive Adhesive Carbon Tape

• Conductive Gold Paste

• Conductive Silver Pen

• Copper Spray

• Double Coated Copper Conductive Tape

• Double Coated Carbon Adhesive Sheet

• Electrodag 502

• Fast Drying Epoxy Glue

• Fast Drying Silver Suspension.

• Heavy Duty Tape Dispenser

• Leith - C - Plast

• Lift-N-Press sticky Tabs for SEM Stubs

• Mikrostik™

• Scotch Magic Tape

• Silver Conducting Pain

• Silver Epoxy Kit

• Silver Coated Polyester Tape

• Spectro Tabs

• Sticky Tabs for SEM Stubs

• Sticky Tabs for SEM Stubs

• Tempfix Adhesive

Silver Conducting Paint

Fast drying  colloidal silver  paint, excellent for affixing specimens to mounts.

Applicator included in the
bottle.

Fine silver grain size. 15 g per bottle
 

Back To Top

Colloidal Graphite

A conductive colloid which gives adhesion between specimen and mount.

Available in water or alcohol base

Conductive Graphite, water base:
Fine surface texture, average flake size 1 um.

Conductive Graphite, alcohol base:
Fine surface texture, average flake size 1 um.

Back To Top

Electrodag 502

Graphite paint with solvent base (MEK)  Maximum temperature 275°C.

Keep container tightly closed when not in use.

30 g per bottle.
 

Back To Top

Colloidal Graphite (Aquadag)

A preparation of pure, fine colloidal graphite in water. It may be painted  on to surfaces to provide continuous, adherent, dry films of graphite or it may be used simply to form a conducting path.

Back To Top

Mikrostik™

A nonconductive clear liquid adhesive. Small particles can be mounted on an ultra thin base, due to the thin layer which results after application. Can be diluted with MEK-- Dries very fast.

Comes 14 ml in bottle.

Back To Top

Colloidal Silver Paste

• An excellent SEM adhesive that can be applied with a toothpick or other fine applicator.

• Particle size: 0.4 - 1.0 um.

• Cures in 16-20 hours at room
  temperatures, or 30 minutes
  at 125° C.

• Can be diluted with silver
  paste extender.
  
   

Back To Top

Camel Hair Brushes.

For the application of liquid adhesive to SEM specimen mounts.

Back To Top

Carbon Conductive Cement

An electrically Carbon Conductive Cement (CCC) for specimen mounting in all SEM work. The conductive specimen can be immediately investigated after the cement  has dried. Non-conductive specimens need only to be coated with carbon or metal.

Back To Top

Tempfix Adhesive

A new thermoplastic adhesive, excellent for mounting powder or small particles for SEM. Contains no solvents and it is stable in high vacuum. At 40° C it becomes adhesive and melts at 120° C.
 

Back To Top

Leith - C - Plast

This is a special adhesive with very high electrical conductivity and permanent plasticity for use in the preparation   of large specimens for SEM work.

Back To Top

Fast Drying Epoxy Glue

Fast, strong adhesive for affixing specimens to SEM stubs. Cures without pressure or heat.
 

Back To Top

Silver Epoxy Kit

Two part electrically conductive silver epoxy suitable for mounting SEM specimens as well as other applications.
 

Back To Top

Conductive Silver Pen

This Specially formulated silver-bearing thermoplastic polymer dries very fast at room temperatures. Provides instant silver traces Suitable for affixing samples to SEM.

Back To Top

Fast Drying Silver Suspension.
 

Fast drying silver suspension contains fine grain of silver flake suspended in a solvent and forms a fine layer of silver film. Excellent for specimen mounting on stubs.

Back To Top

Apiezon W100 Wax

Apiezon W100 wax can  make semi-permanent vacuum seals It is also recommended for use in mounting specimens on SEM stubs. Provides a very smooth surface and it can at any time be softened by heating to allow removal of the specimen.

Back To Top

Conductive Gold Paste

Fast drying gold paste useful for analytical analysis where silver is not suitable. It is supplied in paste form, 75% gold content. Dries at room temperature. Maximum service temperature is 65° C

Back To Top

Copper Spray

This is a highly conductive copper based spray which can be used to shield against electromagnetic interference as well as to protect against electrostatic discharge.
 

Back To Top

Sticky Tabs for SEM Stubs flat

Convenient and easy to use. Simply press the disc on to a stub surface and pull the tab to peel off the backing paper. A clean, flat disc of fresh double-sided tape is left on the stub. Ideal for mounting small specimens, powder and other particulate samples. 2592 tabs in a box.

Back To Top

Sticky Tabs for SEM Stubs

These sticky tabs may be affixed to 12.5mm specimen stubs. The tabs is pressed on and when peeled off a layer of adhesive stay on, which small specimen may be affixed.

Back To Top

Lift-N-Press sticky Tabs for SEM Stubs

These conductive Lift-N-Press adhesive tabs are excellent for mounting delicate, small specimens on stubs. The tabs are pressed on and when  lifted off,  a fine layer of film is left on the stub surface.
 

Back To Top

Aluminum and Copper Tape

Aluminum Conducting Tape: this aluminum foil, with conducting adhesive, has a clean and smooth surface. Dimensions:  6.3mm wide and 16.4 m long.

Copper Conducting Tape: this copper foil, with  conducting adhesive, has a clean and smooth surface. Dimensions: 6.3mm wide and 16.4 m long.

Back To Top

Double Coated Copper Conductive Tape

Double coated copper tape is electrically conductive through pressure sensitive acrylic adhesive. This enables specimens to be attached to the top surface of the tape directly.

Dimensions: 12.7 mm wide.

Back To Top

Conductive Adhesive Carbon Tape

In response to customer demand this popular, well known carbon adhesive tape is now offered with increased purity as well as a greater variety of widths.

The double adhesive and conductive design permits quick mounting of specimens without using any adhesives. Also excellent for the type of specimen mounting where the specimen could be harmed by solvent vapors. The tapes are highly conductive and may be used for SEM or EDS applications. The variety of widths permits efficient use with various specimen mounting sizes. The tape thickness is 0.16 mm. and is available in 6, 8, 12, 25, and 50 mm widths.  Length of the roll is 20 meters.

Back To Top

Carbon Conductive Tabs

These double-sided conductive carbon tabs can be pressed on to the specimen mount. When the backing film is removed it will leave a conductive adhesive. Ideal to use for uncoated small specimens. Widely used for variety of applications. Temperature maximum is 60°C. Trace of impurities of Si, Fe, Mg and Na may be found. Carbon tab thickness is 0.25mm (excluding backing and protecting liners). These tabs come on a transparent foil for protection and shipping.

                                                    Available in three sizes: 9, 12, and 25 mm diameter.

Back To Top

Carbon Tape of Carbon Tabs Quality

Made from the same material as the standard Carbon Conductive Tabs, this tape  is available in three sizes: 12mm, 25mm and 65mm wide.

Back To Top

Spectro Tabs

When you need higher purity carbon, the "New
Spectro Tab” is your answer. The standard carbon adhesive discs prove to be a quick and convenient means of attaching SEM specimens to stubs. For X-ray analysis of small particles and powders the impurities present in the adhesive can give rise to anomalous results. The new Spectro Tabs have much lower levels of impurities.

Back To Top

Double Coated Carbon Adhesive Sheet

This double-sided electrically conductive adhesive sheet provides very clean background, little gas-out under vacuum. Easy to cut and sizing to samples. Won’t absorb or penetrate specimens, as liquid
adhesives might. Mount highly porous or other absorbent samples.

Dimensions: 5 x 12 cm, 0.16mm thick

Back To Top

Double Coated Silver Adhesive Sheet

This double-sided highly electrically conductive adhesive silver sheet is excellent for SEM work. It is easy to cut and size to samples and  it won’t absorb or penetrate specimens, as liquid adhesives might. Can be used to mount highly porous or other absorbent samples.

Dimensions  5 x 12 cm, 0.13mm thick

Back To Top

Adhesive Tape, Non-conductive
(With liner)

This 3M™ Scotch No.666 tape is nonconductive transparent tape has adhesive on both side with whitepaper liner. Produces very good adhesion and is clean to work with.

Dimensions:

6.35 mm1/4” wide and 32m long on a 76mm (3”) core.

Back To Top

Adhesive Tape, Non-conductive
(Without liner)

This 3M™ Scotch No.655 tape is nonconductive transparent tape has adhesive on both side without a liner. Produces very good adhesion and is clean to
work with.

Dimensions:

19 mm (3/4”) wide and 33m long on 76mm (3”) core.

Back To Top

Adhesive Transfer Tape (No.465 )

This 3M™Scotch No.465 transparent transfer tape is on  a paper liner. The tape can make contact on almost any surface. Remove the paper liner and leave the sticky film for mounting or attaching.

Dimensions:

12.7mm wide (1/2”) 55 m long on a 76mm core.

Back To Top

Adhesive Transfer Tape (No.410)

This 3M™Scotch No.410 double coated paper tape,   has many useful applications.

Dimensions:

12.7mm wide (1/2”) 55 m long on a 76mm core.

Back To Top

Silver Coated Polyester Tape

Silver polyester tape has many useful applications. It is good for making glass knife boats.

Available in 9.5mm and 12.7mm wide, 66m length, on  76mm core.

Back To Top

Scotch Magic Tape

This 3M™ Scotch No.810 tape is very popular. It is invisible when applied, resists moisture and will not crack or yellow. Because this versatile tape may be written on it can be  used for making small labels as well as many other useful applications.

Dimensions:19 mm wide and 25m long .25.4mm (1”) core size

Back To Top

Heavy Duty Tape Dispenser

This dispenser is suitable for tapes up to 25mm wide  and having a core dimension of 76mm. It features heavy construction with rubber base to prevent slipping.

Back To Top